China Customized DS1202Z-E Digital Oscilloscope 200MHz Manufacturers Suppliers Factory

DS1000Z-E Series Digital Oscilloscope

The RIGOL DS1000Z-E series oscilloscope is a high-performance, cost-effective digital oscilloscope. It is available in two bandwidth models: 200MHz (DS1202Z-E) and 100MHz (DS1102Z-E), featuring 2 analog channels, a standard 24 Mpts memory depth, and a 30,000 wfms/s waveform capture rate. Built upon the UltraVision technology platform, it supports serial bus decoding (I2C, SPI, RS232), hardware waveform recording and playback, and is equipped with a 7-inch high-definition display as well as LAN/USB interfaces. It is an ideal choice for entry-level R&D, repair and debugging, and university laboratories.

Description

The RIGOL DS1202Z-E is a 200 MHz bandwidth, 2-channel economical digital oscilloscope specifically designed for engineers, educators, and electronics enthusiasts. It has upgraded the bandwidth on the classic DS1000Z series platform and integrates a number of core accessory functions, offering high-speed signal debugging capabilities at an extremely competitive price.

Specifications

Model	DS1202Z-E
Analog Bandwidth	200 MHz
No. of Analog Channels	2
Max. Sample Rate	1 GSa/s (Single-channel), 500 Msa/s (Dual-channel)
Max. Memory Depth	Standard 24 Mpts (Single-channel), 12 Mpts (Dual-channel)
Max. Waveform Capture Rate	30,000 wfms/s
Hardware real-time waveform recording and playback functions	Up to 60,000 Frames
Timebase Scale	2 ns/div to 50 s/div
Input Impedance	(1 MΩ±1%) \|\| (15 pF±3 pF)
DC Gain Accuracy	<10 mV: ±4% of full scale ≥ 10 mV: ±3% of full scale
Vertical Scale (Probe ratio is 1X)	1 mV/div to 10 V/div
Standard Trigger Function	Edge, Pulse, Slope, Video, Pattern, Duration, Setup/Hold, RS232/UART, I2C, SPI, Runt, Window, Nth Edge, Delay trigger, and Timeout
Bus Decoding	Parallel decoding, serial bus decoding: RS232, I2C, and SPI
Waveform Calculation	A+B, A-B, A×B, A/B, FFT, A&&B, A\|\|B, A^B, !A, Intg, Diff, Sqrt, Lg, Ln, Exp, Abs, and Filter
Auto Measurements	Period, Frequency, Rise Time, Fall Time, Positive Pulse Width, Negative Pulse Width, Positive Duty Cycle, Negative Duty Cycle, tVmax, tVmin, Positive Rate, Negative Rate, Delay 1 → 2 , Delay 1 → 2 , Phase 1 → 2 , Phase 1 → 2 , Maximum, Minimum, Peak-Peak Value, Top Value, Bottom Value, Amplitude, Upper Value, Middle Value, Lower Value, Average, Vrms, Overshoot, Pre-shoot, Area, Period Area, Period Vrms, and Variance
Interface	USB Host, USB Device, LAN, Aux Output (TrigOut/PassFail)
Display	7-inch WVGA (800×480), multi-level intensity grading display

Applications

One-sentence summary:
Widely used in education labs, embedded development, electronics repair, and production testing — a basic tool suitable for learning and daily debugging.

Three core application scenarios:

University teaching: Student lab courses in electronic engineering, automation, etc., for learning waveform observation and measurement.
Embedded development: Analyzing I2C/SPI/RS232 bus communication between MCUs and sensors, debugging programs.
Circuit repair: Quickly locating faulty signals in devices like switching power supplies and home appliance control boards.

Functionality

The DS1000Z-E series digital oscilloscopes are high performance and economical digital oscilloscopes for e-commerce designed by RIGOL to meet mainstream needs.

Clear Vision — High sampling rate and deep memory allow long-term signal recording without losing details.

Precise Capture — High waveform capture rate leaves hidden abnormal signals nowhere to hide.

Knowledgeable — Supports serial bus decoding to "read" communication data between chips.

Playback Capable — Hardware waveform recording function facilitates post-analysis of faults.

Easy Control — Supports LAN and USB remote connections for easy integration into automated test systems.

Key Features

Analog channel bandwidth: 200 MHz (DS1202Z-E); 100 MHz (DS1102Z-E)

2 analog channels

1 GSa/s real-time sample rate

Memory depth up to 24 Mpts

Up to 30,000 wfms/s waveform capture rate

Up to 60,000 frames of hardware real-time and ceaseless waveforms

recording and playback functions

Innovative UltraVision technology

Various trigger and bus decoding functions

Low noise floor, vertical scale range: 500 uV/div to 10 V/div

Various interfaces: USB Host & Device, LAN (LXI), AUX

Novel and delicate industrial design, easy to use

7-inch WVGA (800×480) TFT LCD, intensity graded color display

Custom Design

The main design philosophy of the DS1000Z-E series digital oscilloscope :"Centralize resources, make precise trade-offs, and deliver core performance comparable to four-channel models at a two-channel price."

This is embodied in the following three points:

Performance democratization: Bringing high-end features such as 24 Mpts deep memory and 30,000 wfms/s high waveform capture rate down to entry-level products.
Focus on mainstream needs: Concentrating on 2 analog channels to meet 80% of daily debugging and repair requirements, avoiding paying for unused fourth channels or built-in signal sources.
Flexible value-added features: Core functions (such as bus decoding) are available as options, allowing users to enable them as needed, which both controls the base cost and retains expansion capability.

Customization Process

Why Choose MXTD

12+ Years of Excellence: Our deep industry experience ensures you receive proven, reliable solutions. We understand the challenges you face in RF testing and measurement.

Expert Building Group: Your venture benefits from our gifted R&D experts who remain current with the most recent advances and industry requirements.

Comprehensive Bolster: You get total after-sales benefit counting fast investigating, standard follow-ups, and specialized help at whatever point needed.

Quality Confirmation: Your speculation is secured by our strict quality control forms and exhaustive testing procedures.

Fast Reaction: We react rapidly to your needs and convey arrangements on plan. Your extend timelines stay on track with our proficient forms.

Certifications and Certificates

Logistics and Transportation

FAQ

Q: What are the core advantages?

A:24 Mpts deep memory + 30,000 wfms/s high waveform capture rate. Provides four-channel-level performance at a two-channel price. Supports serial bus decoding.

Q: 100MHz or 200MHz — how to choose?

A: For daily MCU/sensor debugging, the DS1102Z-E (100MHz) is sufficient. For high-frequency clocks or high-speed digital signals, go with the DS1202Z-E (200MHz).

Q: What to do if the waveform is unstable/jittering?

A: Press the 【Auto】 button for automatic setup. Or check if the trigger source is correct and if the trigger level is adjusted to the middle of the waveform.

Q: Why is the voltage reading inaccurate?

A: The most common cause is a mismatch between the probe attenuation ratio setting and the actual probe ratio (e.g., for a 10X probe, set it to 10X in the channel menu).

Q: Does it support serial bus decoding?

A: Supports I2C, SPI, and RS232. However, the decoding function is an option and requires a separate purchase of a license code to activate.

Contact Us

If you are looking for an affordable two-channel oscilloscope that features deep memory, a high waveform capture rate, and the ability to analyze serial buses, the DS1000Z-E series is an excellent choice. It doesn't make you pay for features you don't need, yet it fully meets your requirements in terms of key measurement capabilities.

Email: manager03@mxtdinfo.com

Please contact us immediately to learn how our digital oscilloscopes convert analog signals into digital signals and then display, store and analyze them. We look forward to helping you succeed with our reliable and high-performance RF solutions.